SOLAR

The 4001, a 12/24 Volt commercial jump starter, from SOLAR, is a versatile unit that provides endless jumps for auto lots, auction houses, fleet operations, implement dealerships, agricultural operations, construction operations and other environments where heavy duty jump starting is a regular occurrence. Model No. 4001 accommodates two user-installed batteries (up to Group 31 size) to deliver its jump starting power and features 10-foot 1/0 jumper cable leads, enabling easy access to the starting points on vehicles of all shapes and sizes. It features an enhanced, automatic charging system that enables easy charging and maintenance of the installed batteries when not in use. The charging system can be optimized to properly charge both flooded or AGM battery types.

Providing endless jump starts for commercial fleets or heavy construction equipment, this unit will start any 12 Volt or 24 Volt engine. Features an amazing 16 ft cable reach from its 4/0 cables and heavy-duty clamps. The unit can be recharged via two methods: via the A/C charging cord or when connected permanently to the vehicle's using the 12 Volt alternator harness.

The "Big Boy" of wheeled jump starting units has gotten an upgrade: features installed AGM batteries to increase unit longevity and eliminate spill hazards. Specifically designed for over-the-road transportation and heavy-duty implements starting applications. It exceeds the challenges of frigid weather and delivers the instant raw power of 1400 cold cranking amps in 12 Volt mode and 800 cold cranking amps in 24 Volt mode. Features 10 ft cable leads made of 1/0 cable to reach the starting points on vehicles of all shapes and sizes.

The 1876 provides variable load carbon pile testing capability for 6, 12 or 24 Volt batteries to 2000 CCA. It allows quick, conclusive assessment of battery capacity as well as at-a-glace diagnosis of alternator output and starting system capacity. With dual gauges, it is easy to manage the testing process and observe the results, Plus, load control is smooth and precise.

The BA6 Battery and System Tester features an operating range of 4.5-16V and is optimized to test six distinct battery types: Conventional Flooded Acid, AGM Flat Plate, AGM Spiral Wound, Start-Stop AGM, Start-Stop Enhanced Flooded and Gel Cell batteries. It also features the convenience of starting and charging system testing, offering quick assessment and providing both a numerical result and a pass/fail result. The BA6 has a testing range of 100-1200 CCA, covering everything from powersport to Group 31 batteries. It is capable of testing batteries per the CCA and CA standards. It features an LCD display that offers a high level of detail throughout the testing process and improved viewing in bright sunlight. It also features reverse polarity protection to avoid damage from reverse hookups and over-voltage protection.

Utilizing simple knob controls, the PL3740 is easy to use and intuitive. Simply set your desired function (Charge, Power Supply Mode, Engine Start) and your operational mode (charge duration or PS Mode goal voltage) and press START. It's that easy. Plus, in charging function, it features both an AUTO charge setting as well as the more traditional timed (manual-style) settings, including 20 / 40 / 60 / 90 / 120 minute settings. LED indicators alert the operator to charging progress and the unit incorporates a range of safety features to make charging safe for the operator and the battery or vehicle being serviced.

The BA327 offers a complete testing solution for 6 and 12 Volt batteries and 12 and 24 Volt charging systems. With an operating range down to 1.5V, it can even accurately test discharged batteries and features a testing capacity to 2000 CCA. Compatible with a wide variety of battery types, the BA327 is designed to test flooded, AGM flat plate, spiral wound, gel cell, start-stop AGM and enhanced flooded batteries. It features 10' cable leads, replaceable cable ends, temperature compensation and a convenient storage case. It features an LCD display that offers a high level of detail throughout the testing process and improved viewing in bright sunlight. It also features reverse polarity protection to avoid damage from reverse hookups and over-voltage protection.

The BA227 offers a complete testing solution for 12 Volt batteries and systems. Features an operating range from 6.5-15V and a testing capacity from 100-1400 CCA. Compatible with a wide variety of battery types, the BA227 is designed to test flooded, AGM flat plate, spiral wound, gel cell, start-stop AGM and enhanced flooded batteries. It features 36" cable leads, replaceable cable ends, temperature compensation and an easy-to-use interface. It features an LCD display that offers a high level of detail throughout the testing process and improved viewing in bright sunlight. It also features reverse polarity protection to avoid damage from reverse hookups and over-voltage protection.

Combining fully automatic operation and the ability to properly charge multiple battery types, the PRO-LOGIX PL3760 is the perfect charger to meet the needs of today's and tomorrow's professional technician. Intelligent, beneficial, safe and versatile ? one charger does it all, from fast charging and battery repair to engine starting assistance and stable power mode for system diagnosis, repair and programming. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL3760.

The BA9 Battery and System Tester features an operating range of 4.5-16V and is optimized to test six distinct battery types: Conventional Flooded Acid, AGM Flat Plate, AGM Spiral Wound, Start-Stop AGM, Start-Stop Enhanced Flooded and Gel Cell batteries. It also features the convenience of starting and charging system testing, offering quick assessment and providing both a numerical result and a pass/fail result. The BA6 has a testing range of 40-1200 CCA, covering everything from powersport to Group 31 batteries. It tests to multiple standards, including CCA, CA, DIN and EN. It features an LCD display that offers a high level of detail throughout the testing process and improved viewing in bright sunlight. It also features reverse polarity protection to avoid damage from reverse hookups and over-voltage protection.

Delivers a true 100 amp load and is calibrated to test batteries up to 1000 CCA. It features an easy-to-read color coded meter and a graduated scale for assessing battery condition. It can be used to test 6 and 12 Volt batteries and starting/charging systems.

The power and precision of PRO-LOGIX in a 24 Volt portable unit. Plus, the PL2410 features 12 Volt operation to add versatility. It delivers fully automatic operation, it is very easy to use and delivers a proper, customized charge to every battery it services. Intelligent, beneficial, safe and versatile ? it is an ideal universal battery service tool. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2410.