S & G Tool Aid Corp

Check oil pressure in automotive transmissions and engines. Adapters provide coverage of most domestic and imported cars and light trucks. Includes two gages: Large Gage calibrated from 1-600 PSI (0-4,000 kPa & 0-7.0 BAR) and Small Gage for lower pressure requirement 0-50 PSI (0-3.5 BAR) Large gage can be used for all applications and has hang-up hook. Small gage is for more accurate reading of engine oil pressure where maximum oil pressure does not exceed 50 PSI (3.5 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Supplied with instructions in a durable vinyl pouch.

Provides excellent balance with 5 lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Designed for that in-between job where the 10 lb. slide weight is too heavy and the pullers with 3 lb. weights are too light. Nose cone and shaft threads are 5/8"-18.

Use this simple level to restore a vehicle's camber setting after strut repair or installation. Allows technician or customer to safely drive the vehicle before a more precise wheel alignment can be performed. Also useful for repairs on CV joints, ball joints and tie rod ends. Features includes: Super strong magnet - mounts on brake rotor, spindle or steering knuckle. Easy to read, unbreakable bubble level. Camber settings from -3° to +3° for additional adjustment. Works on all vehicles equipped with MacPherson struts. Can remain on the vehicle during repair or can be removed. Easy to use - (1)Place on rotor before repair and zero the level. (2)Tighten the wing nut. (3)After the repair, push or pull on the strut until the level returns to the zero position.

Use for body forming on fenders, hoods and panels against a body dolly. Excellent for any hammering operations such as ball joints and U-joints. Polished face is 1" diameter. 7" overall length to access hard to reach areas. .401" Parker shank.

Cut-Off Wheels are 3" diameter x 1/32" thickness x 3/8" center hole diameter, packed 100 per box. Abrasive reinforced wheels are ideal for automotive and autobody repair. Cut all ferrous materials with ease - cut through clamps, hangars, sheet metal, angle iron, tubing, castings, mufflers and rusted bolts. Easier and safer to control than a torch, faster and less effort than a hacksaw. Wheels comply with American National Standards Institute Code B7.1 (1968 Rev.) and OSHA. Rated 25,000 RPM maximum speed (Pneumatic cutting tool should have safety guard).

3" long scroll blade has 18 teeth per inch. For fine cutting of material over 1/8" thick. Use to cut through a variety of metals, fiberglass and plastic Bi-metal blades contain cobalt for long lasting, shatterproof use. Fits Chicago Pneumatic, CIA, Florida Pneumatic, Ingersoll-Rand, Mac, Sears, Snap-on and any other air saw with dual set screw blade retention. Maximum speed is 10,000 strokes per minute. Packed 5 blades per display pouch.

Quickly and easily depresses the terminal retention tabs to allow the terminal to be removed from the connector when repairing wiring harnesses. Use with three sizes of Weahter Pack terminals: 10-12 AWG, 14-16 AWG and 18-22 AWG. Can also be used to restore the tabs to their original position.

Versatile heat shrink tubes for use in a wide variety of applications in automotive, marine, electrical, industrial, home and more. 160 assorted pieces in 5 colors and 8 sizes: 3/32", 1/8", 3/16", 1/4", 3/8", 1/2", 5/8" & 3/4". Easily shrinks with a Heat Gun or other heat source. Protects solder joints and wires. Forms a secure bond over smooth and irregular shapes. Excellent for insulation, strain relief, abrasion shielding and corrosion protection. Shrink tubes made of polyolefin material. Ideal for color coding and bundling. 2:1 shrink ratio.

Portable and efficient, this tool blasts off rust, scale, carbon, chemicals and paint with ease! Operates on standard compressed air. Has 1/4" Female NPT inlet. Supplied with 10 feet of hose and hardened steel nozzles (two with 13/64" I.D. and two with 1/4" I.D.) Can also be used to blast plain air and/or liquids. Lightweight construction reduces fatigue. Produces a steady stream of abrasive without interruption regardless of height, distance and gravity. Operates with any grade of abrasive. Just place end of Pick-Up tube in bag of abrasive. Requires 1.5 CFM up to 8 CFM of air at 60 to 150 PSI depending on nozzle size used.

Holds the discs used for prepping surfaces. Discs install and remove easily with a quick twisting action. Flexible, flanged rubber backed pad connects to 1/4" steel shaft. For use with air and electric tools. Holding pad can be used with all brands of surface treatment pads. 20,000 maximum RPM.